Software | Office

Office

Production

More about this product:
	Get Drivers/Utilities

Multi-model Print Driver 2

A common printer driver to support multi model MFPs and Printers

1. One common driver supports various MFPs and printers.
The same printer driver can be used to output to various MFPs and printers. Even operating various types of models, only one driver is needed for verification, and this helps to reduce the verification process.

2. Not required to upgrade the installed driver even when print to new models.
Most of MFPs and printers to be launched will support Multi-model Print Driver.

3. Provides secure print environment.
Even as a common driver, it supports Secure Print and Private Charge Print. By storing output document temporarily on the machine, it stops printing unintended data from the control panel; and while cutting down unnecessary printing, it enables diminishing the risk of exposing the document to the third parties.

4. Provides a common driver usable under Citrix XenApp^TM environment.
When using ACCP (AutoCreateClientPrinter) feature under Citrix XenApp environment, the specific printer drivers for all the MFPs and printers on the network must be installed on XenApp server. However, if Multiple-model Print Driver 2 is used, installing several drivers on XenApp server will not be necessary, which helps to reduce the cost of system opertional management ^*1. Moreover, in combination with Print Utility for Citrix XenApp^TM, the configuration information for MFP and printer options is automatically reflected, which realizes the outputs by MFP and printer options that usual ACCP cannot support. Also the operation of the authentication mode will be possible.

^*1: Multi-model Printer Driver 2 must be installed on client PCs.

Multi–model Print Driver 2

Version

v2.7.1.4

Support Language

English
Traditional Chinese
Simplified Chinese
Korean

Support OS

Microsoft® Windows® 2000
Microsoft® Windows® XP (x86 / x64)
Microsoft® Windows Vista® (x86 / x64)
Microsoft® Windows 7 (x86 / x64)
Microsoft® Windows Server® 2003 (x86 / x64)
Microsoft® Windows Server® 2008 (x86 / x64)
Microsoft® Windows Server® 2008 R2 (x64)

English, Traditional Chinese, Simplified Chinese and Korean version supported.

Support Model

ApeosPort–IV C5570/C4470/C3370/C2270
DocuCentre–IV C5570/C4470/C3370/C2270
DocuCentre–IV C2260
ApeosPort–III C7600/C6500/C5500
DocuCentre–III C7600/C6500/C5500
ApeosPort–III C4400
DocuCentre–III C4400
DocuCentre–III C3100 / C4100
ApeosPort–III C2201/C2200/C3300
DocuCentre–III C2201/C2200/C3300
DocuCentre–III 2007/3007
ApeosPort–II C5400/C6500/C7500
DocuCentre–II C5400/C6500/C7500
ApeosPort–II 6000/7000
ApeosPort–II 3000/4000/5010
DocuCentre–II 4000/5010
ApeosPort–II C2200/C3300/C4300 (Controller Version must be 1.122.0 or later)
DocuCentre–II C2200/C3300/C4300 (Controller Version must be 1.102.0 or later)
DocuCentre–II 2005/2055/3005
DocuPrint C4350
DocuPrint C2255
Fuji Xerox 4112/4127 (Controller Version must be 1.103.0 or later)

Specification & Limitations

Multi-model Print Driver 2 (MMD2) is common driver for all models, and works with any target models regardless of the differences between printers and MFDs, or color and monochrome.

[Paper Size]
A3, A4, A5, B4, B5, Letter, Legal, Tabloid, post card, custom 1–20.
These paper sizes are not applicable to some models which do not support above listed paper sizes, or not applicable if Paper Size Settings (Detection Setting for Paper Series such as A/B series) are not properly set.

[Paper Type]
Plain, Heavyweight, HW Reload, Extra HW, X–HW Reload, and custom 1–5.
These paper types are not applicable to some models which do not support above listed types

[Paper Tray]
With MMD2, Paper Tray can always be specified from Auto Paper Select, Tray 1–4, and Tray 5 (Bypass), regardless of configurations of the target output model. Print jobs will be canceled if nonexistent tray is specified. In most settings, Auto Paper Select is recommended. By selecting Auto Paper Select, High Capacity Feeder trays can also be utilized most effectively.

[Duplex Printing]
MMD2 supports duplex printing. When duplex print job is specified for the output machine which does not support the duplex printing, the output will be simplex.

[Other Driver's features]
MMD2 supports most features that model specific drivers provide: multiple–up, booklet creation, watermark, skip blank pages, and so on.

[Finishing features]
Staple, hole punch, booklet creation, folding are available. If the output target machine does not support above features, finishing feature specifications will be ignored.

[Security Related Setting]
MMD2 provides equivalent security related settings and features with model specific drivers. When using Charge Print or Secure Print feature on printer models, some limitations may apply regarding the display of the operation panel.

[Image Quality]
MMD2 can provide comparable image quality output as model specific drivers.
For print mode, three types of Image Quality Settings are available: Standard, High Quality, and High Resolution (Some models do not support the Image Quality setting).

[Forms, Image Overlay]
Not supported.

[Configuration Information]
By using SNMP protocol, Configuration Information of the target models can be reflected to the printer configuration settings of drivers.

[Citrix XenApp environment]
Citrix XenApp 5.0 is supported. Linkage with Print Utility for Citrix XenApp is also supported.

[Linkage with ApeosWare Copy Protection]
Not supported.

Return to TOP